Ritetite Control is a single-component gel super glue with extremely fast bonding characteristics.
It is made using a specially designed thixotropic formula that polymerises (hardens) instantly by absorbing surface moisture. The fast-curing qualities make it a great solution for high-speed industrial scenarios, where there’s a need for a gel-like, viscous adhesive that doesn’t spread or leak the way traditional superglue does.
Because of the thick gel consistency, Ritetite Control works exceptionally well in poor-fitting applications such as rough metal or ceramic repairs, unfinished metal-to-metal bonding and metal-to-rubber.
Characteristics
- Bond most materials within 90 seconds
- Viscosity allows for better application control
- Large 100ml container so you never run out
- Integrated nozzle for easy application
When using Ritetite Control and for that matter any adhesive its extremely important that the surface is clean. We recommend wiping and cleaning the surface with Alcohol to ensure the best bond.
Be sure to apply the details as seen in the Technical data sheet with every application.
Surface Preparation prior to bonding with RITETITE CONTROL
Surfaces should be clean, dry and grease-free before applying the adhesive. Use a suitable solvent (such as acetone or isopropanol) for the degreasing of surfaces. Some metals such as aluminum, copper and its alloys will benefit from light abrasion with emery cloth (or similar), to remove the oxide layer.
RITETITE CONTROL Directions for use.
1) Apply the adhesive sparingly to one surface.
2) Then, bring the components together quickly and correctly aligned.
3) Apply sufficient pressure to ensure the adhesive spreads into a thin film.
4) Do not disturb or re-align until sufficient strength is achieved, normally in a few seconds.
5) Remove any surplus adhesive solvent, nitromethane, or acetone.
NB:
For difficult or porous surfaces using a RITETITE activator is recommended. If bonding polypropylene, polyethylene, PTFE or silicone, prime first with a suitable primer.
For more information, download the Technical Data Sheet.
Specifications
Download TDS Download SDSPhysical properties
- Base compound: Ethyl Cyanoacrylate
- Appearance: Clear viscous gel
- Specific gravity: 1.05
- Hardness barcol: 65
Performance properties
- Service temperature range (short term): 140°C
- Service temperature range (long term): -20°C to 75°C
Available sizes
- Bottle (ml): 100
Storage and Shelf Life
- The shelf life of the products is 12 months, when stored at 18-25oC at 30-70% relative humidity and out of direct sunlight, in good packaging.
Delivery
No administration fees for orders over $98. If the amount is not reached, a single $18 fee will be applied to your total.
For more information please access our Shipping and Returns T&C page.